Best Health Solutions for Controlling Cholesterol Levels

Cholesterol which is found in some of the foods and also produced within the body is a fat like substance found in all cells of the body. Cholesterol exists in the blood in the form of lipoproteins. There are two types of these lipoproteins. They are the low density lipoproteins and the high density lipoproteins. The high density lipoproteins aid in carrying the cholesterol to the liver where it gets removed. On the other hand the low density lipoproteins cause build up of cholesterol in the arteries. Hence, it is essential to maintain high levels of high density lipoproteins and reduce the low density lipoproteins. A healthy life style with good eating habits generally accomplishes this process naturally. But, if you are a person with poor dietary habits then here are some proven remedies to keep the cholesterol levels under control.

The natural remedies for controlling the levels of cholesterol are eating fiber rich foods, regular practice of physical activity, quitting habits such as smoking and alcohol consumption.
It is found that regular consumption of five to ten grams of oat meal everyday helps to bring down the levels of low density lipoproteins by about 23%.
Fish oil supplements are another source for controlling the high cholesterol levels. They even help to bring the triglyceride levels under control.

At times, these natural remedies may not answer the situation and use of medicines becomes essential. In such cases drugs composed of statins are prescribed. However, they are found to show various side effects both in men and women.

Best health solutions for controlling the cholesterol levels naturally are use of herbal medicines. Guggulipid, an extract from the guggul gum, a resin derived from the mukul tree is a proven remedy for controlling the cholesterol levels naturally. It is found to control the incidence of cardiovascular diseases by regulating the balance between the LDL and HDL. The best part of these natural remedies is that they are free of side effect.

Another natural remedy for control of cholesterol levels is use of omega-3-fattyacids. Fish oil which is a best source of omega-3-fatty acid is considered as the best health solution for regulating the cholesterol levels. The antioxidants present in these supplements help in regulating the LDL levels efficiently.

Nuts are generally considered to contain high level of fats and are hence, not consumed by many. But, walnuts which are rich in antioxidants play role in reducing the levels of LDL.

With the fear of increasing the cholesterol levels, many people quit consuming certain types of foods. But, this would only deprive the body of the nutrients present in them. Hence, the natural remedies for controlling the cholesterol levels, is consuming foods that reduce the levels of cholesterol and shift to a healthy living style. If you are not into practicing exercises or good eating habits, it is time to start implementing to avoid major ailments such as coronary heart disease.

Holistic Health and Complementary Therapies – Health Solutions For Our Times

Dramatic fluctuations in the global economy have led to changing perspectives that have an important bearing on our lives and on our health. The first wider shift in perspective associated with this turbulence relates to a growing recognition of the importance of finding new ways to reduce expenses and conserve money. The second shift more directly relates to the health perspectives of an individual with regard to ever increasing costs posed by the health care industry. Prescription prices and medical care seem to be on a steadily rising path and this has inspired many individuals to seek alternative and affordable health solutions not just to tackle their existing ailments, but also to maintain their health and well being. This trend is perhaps most apparent within a growing public domain that is centered on holistic health.

It is important here to point out that holistic health is not some new revelation that has only just emerged and been made accessible to the public. It encompasses ancient arts of healing that can be viewed as the original forms and expressions of medical practice. With the rapid expansion of the medical and pharmaceutical industries during the latter half of the twentieth century and their increasing alignment to profit rather than health, holistic health practices were widely disparaged and dismissed as “quackery.” More recently, however, there has been resurgence in attention to and interest in holistic health practices. A more informed public is increasingly becoming aware that holistic health solutions offer safer alternatives to the abrasive ingredients found in pharmaceutical drugs, without many of the harmful side effects associated with the latter. An individual who opts for holistic health treatments can access a reasonably priced health solution that is often both effective in dealing with their ailments and safeguarding their existing state of health.

Of course it is not being suggested health solutions are a panacea for all medical problems; the medical industry has indeed provided solutions for some of the most deadly contagions in the world. Holistic health solutions should be viewed not as alternatives but as complementary therapies that enable those who apply them to still benefit from the best options and advances that the medical industry has to offer while maximizing the odds of improving and maintaining long-term and high quality health within a reasonable budget. It is often stated that health is more important than money but this argument seems less convincing for those who are about to lose their homes in order to meet exorbitant medical costs. Choosing holistic health routes not only helps to conserve money in these times of uncertainty and financial insecurity, but also provides safe and effective solutions for improving and safeguarding our health.

Boosting Affiliate Earnings With Top Health Solutions

The internet is more than just a platform for connecting with friends and family, or chatting with your lover and buddies, or surfing through the social networking sites. The internet can also be a wonderful platform for earning a great income.

If you can setup a website or blog, you will have a better chance of earning money online. All you need to do is join an affiliate program.

Here’s an overview of affiliate marketing and how you can boost your earnings by offering reliable, premium-quality health solutions.

What Exactly Is An Affiliate Program?

Affiliate programs are truly popular online money-making platforms today. They are basically arrangements made between an online merchant website and an affiliate partner, where the merchant pays affiliates with commissions each time they’re able to refer, or direct online customers to their website.

In this setup, the affiliate marketer posts links on their website, and is paid according to a specific setup or arrangement. Some affiliate programs pay affiliate partners for the number of people the affiliate sends to the merchant’s site, or pays commissions for the number of people who buy something or perform some other action.

What Are The Basic Affiliate Arrangements?

According to affiliate marketing experts, there are basically three types of payment arrangements in an affiliate program. The merchant website either pays the individual affiliate on a pay-per-sale basis, pay-per-click, or pay per lead basis.

In a pay-per-sale mode, the merchant website pays the affiliate whenever the affiliate brings or sends a customer who buys something. The payment is usually in the form of a percentage of the sale, while other merchants pay a fixed amount per sale.

In a PPC, or pay-per-click setup, the merchant website pays the affiliate based on the number of visitors who click on the link, and comes to visit the merchant’s website.

In a pay-per-lead scheme, the merchant pays the affiliate according to the number of visitors they refer who sign up as leads.

The SellHealth Affiliate Program

One of the best health affiliate programs today is the SellHealth affiliate program. This company is famous for offering several high-quality and proven health and wellness products, as well as for giving out the highest commissions. Their program has already paid out millions of dollars in commissions, since they opened in 2003.

SellHealth’s products have been tested to adhere to the highest industry standards, and their affiliate offers have also been proven to ensure the highest commission levels and sales conversion. The program also uses the latest and most updated affiliate technology, to ensure that every sale is tracked and credited to the affiliate. The program’s product lineup also uses proven and tested ingredients and formulations, which explains why SellHealth’s wellness product offerings are very popular in the market today.

Note: This article may be freely reproduced as long as the AUTHOR’S resource box at the bottom of this article is included and all links must be Active/Linkable with no syntax changes.

Designing Small Outdoor Spaces in Your Hospitality Business

Every outdoor area, no matter how small it is, deserves to be treated with attention. This need amplifies when it comes to restaurants, hotels, cafes and resorts. So hospitality businesses should be extra careful when designing a small outdoor space like a balcony or even a limited terrace.

In order to turn a narrow area into an attractive place to hang out, two steps must be applied: choosing the right outdoor furniture and installing them effectively.

How to choose the furniture?

Selecting small furniture

When you have a narrow area, you can still furnish it with small items that fits. For example, instead of cramming the balcony with a single sofa, use a couple of chairs and a round coffee table so guests can enjoy a relaxing morning. Don’t forget to take measurements, here a few centimeters can make a difference.

Using multi-functional outdoor furniture

A small area limits the use of several furniture to suit all needs. Therefore, an effective solution would be to use multi functional patio furniture for your restaurant, hotel, resort or cafe. A modular outdoor setting allows you to have a minimum of items with the most uses possible. For example, if a daybed and living set don’t fit together next to the pool, replace them with an outdoor furniture piece that gives you both. In that case, Skyline Design’s Bishan can be an appropriate way to combine the two, as it can be used as a daybed or a sofa set.

Going vertical with decorations

One of the latest garden design trends is the adoption of the vertical space in the outdoors. In other terms, exploiting placing decoration accessories or even plants on the walls surrounding the outdoor living area. In addition, due to this new “wave”, brands are now creating items for vertical use. For example, the famous French brand, Maiori, produced chic planters that can be placed on top of each other, in order to save horizontal space.

How to design the small space to make it look wider?

Designating a focal point

Installing outdoor furniture in a small area can be messy. A bit of organization will turn a chaotic setting into a comfortable and relaxing spot. One of the first steps to take is to focus all the outdoor chairs and sofas to one direction. A focal point can either be external like the sea, the garden or a specific landscape, as well as internal like an outdoor lounge or a hanging chair. You can add accessories according to your needs, but make sure that you still have only one focal point.

Paving the path and the living area

Another way to embellish a small outdoor space is to pave the path and the living area. However, this is a delicate task that can either break it or make it. How? Applying geometrical designs in the pavement can make the outdoor area look smaller. And most probably, that’s not what restaurants and resorts are looking to accomplish, on the contrary.

Keeping it simple with only the needed furniture

One of the main issues in small areas is the lack of space for people to move around. This is mostly due to decoration items that can be dropped out. Therefore, removing all unneeded elements, like decorations and plants, will make the small area more spacious, allowing people to be more comfortable.

Designing a small outdoor space is definitely a challenge for any interior designer or hospitality furniture company. However, choosing the right outdoor furniture, and efficiently designing the area will transform your small outdoor space into an endless paradise. So don’t miss out on this opportunity.

Best Accounts Payable Processing Practices

When it comes to working in accounts payable, there are a dozen things that can happen to cause a good day to become a bad one – and these things are often actions that took but a second or two to happen. These mistakes often occur not because of a lack of training or due to faulty practices but often because people are unaware of ways to improve the work situation.

Thankfully, there are many actions that can be taken to ensure that your business is using the best accounts payable processing practices available. By doing this, you can minimize the risk and exposure that result from not having a totally secure system and effective recovery process. While there are many different steps you can take, one of the most important things is that you track a number of elements in the accounts payable processing department.

· Keep up with the number of invoices that come into the accounts payable department in given period of time. The larger your company the more of these there will be. Tracking these will give you a baseline and make it easier to track other items within your department.

· How many invoices are processes as a percentage of the total number of invoices during a specific amount of time. Tracking this helps measure how effectively and efficiently your department is getting the work done. If you feel that the work being done is not enough, then sit back and determine what can be done to make your department more efficient.

· Pay attention to the rate of wrong payments as a percentage of total payments. You need to be aware of any over or under charges. Using a HER program can minimize occurrences such as these.

· Figure out how much it is costing you per invoice processed. Be sure to note things such as software costs, IT support, hardware, and any other types of overhead. There are a number tools that can help you be effective and yet still keep the bottom line in the black.

· Track how many invoices are electronic versus paper. It is cheaper to process an electronic invoice than a paper one. In addition, the electronic invoices require less time to process. Hence, the more electronic processing and information storage is a better way to improve your budget and work efficiency.

Having the best accounts payable processing steps in place, you can be certain that you are doing all you can to protect your business. Talk to a team of business management specialist and learn how you can begin to better protect your company.

A Perfect Sales Training Coach

Even though there isn’t any formal education required to be a bigwig in sales, it is true that most of the people are involved in selling products and services. One can find several people performing sales tasks and each and every one of them are trying to complete with one another. In order to stand a class apart from others, it is important to acquire some excellent selling skills, determination and the perfect mindset. It is very important to move along with the change, as the environment keep on changing. So, it is essential to think out of the box, as it helps to stay ahead of the business rivals. So, it is essential to stay equipped with some of the effective sales tips by availing the services of a sales coach. Only those who are well trained to perform such tasks must perform the task of sales. This task should be performed by the experts in sales training. When you are in search of an expert, you must know that there are several speakers across the globe who claims to be the sales coach. However, make sure that you choose a perfect person offering useful sales tips programs to enjoy the maximum output. You must consider certain aspects while selecting the perfect sales training coach to save your money and time.

About Choosing the Right Sales Training Coach
It is important to consider the right kind of issues prevailing in your business to get the perfect solution immediately. There might be many areas in your business that require improvement. Generally, your sales managers would need you to enhance the performance of their team. So, it needs you to redefine the current sales process and the way through which it is executed. So, make sure that you hire the services of a best sales training coach who can improve the sales strategies as well as the selling skills of your workforce.

Top qualities of a sales training coach
The sales training coach whom you are choosing must have the following qualities to prove that he is a sales pro.
1 Highly experienced: The sales training coach whom you approach must be the one who has immense years of experience to handle the sales process. Observe the training coach’s path of career and check his achievements in the career timeline. Choose the person who has a lot of professional experience is the proof that this sales coach is reliable and credible.
2 Interaction with sales team: The expert sales training coach must know the secret of winning the trust of your sales team. He should have handled several sales teams in his career and must be able to interact with them in a positive fashion. This quality of a coach can help your sales build the trust on the tips for selling he teaches them.
3 Should provide intelligent coaching: The sales coach must hold intellectual sales training sessions that have activities which can kindle the sales skills of your work team. The training sessions or coaching classes that the coach conducts should be related to the specific industry of your business to improve the sales wing of your business. The sales coaching should be aimed at helping your work team members become experts in their related field.

The sales training program that the coach offers should have several components that are essential for the growth of the organization. So, it is important for you to avail the services of a sales coach like. We to give your sales team the much needed push.

A Virtual Assistant

In this year and age, everything is related to the internet. From shopping, banking, bills payment, social interaction, communication and every bit of actions we humans do nowadays was somehow linked to the use of the internet. For several years I had been working a very traditional job in retail. However, personal circumstances made me re-think my current situation. A part of me always feels that traditional jobs here in the Philippines are very time-consuming. With a standard 48-hour work and a 1-day off per week, quality time with family and peers seems unlikely. So if work schedules are eating much of our time, is it after all worth it? This question bugged me for a lot of months. Then one day I came across KOM Academy’s Facebook posting for a free seminar on “How to be a Virtual Assistant.” Curious, I immediately inquired and pre-registered for this event. That’s when I realized that there are a lot of opportunities outside the traditional work environment.

What is a Virtual Assistant by the way? These are smart individuals offering administrative, creative and technical skills to remote clients. So what made me think this virtual job is kick-ass better than my old job? Reason number 1, “I am my boss”! As VA, as they call it, you work as an independent contractor to the client. Which means that you don’t work for a company or an employer, but instead they outsource you to render them the services they require. About this, you are not limited to work for a single client. Hence, the second reason – more clients, more income. By this I mean you can are not limiting yourself to only one source of income. You have the control to expand your financial gains as you deem fit. The third reason, it is home-based. What is not to love working at the comforts of your space? No hassle from commuting, dealing with worsening traffic situation of the city, increased transportation expenses, annoying amnesiac office mates who always borrow your things but never bothers to return them are just a few to mention.

If there is a convenience in the environment, work schedule is something that is flexible as well in this industry. That is the fourth reason why I considered engaging into this business. The chance to be given a schedule that is favorable to your liking is something that is highly unheard of in traditional jobs. Often you must be employed a full-time job to get a decent salary. Whereas in VA, even part-time jobs can still get you good pay. Mainly because you are paid based on the quality of your work output and not just merely on the number of hours you spent. Furthermore, output-based jobs present more opportunity for workers to get promoted as evaluation is real-time.

The fifth reason I seriously consider is that this job is never boring. As mentioned earlier, VAs provide different service from administrative, to creative and even technical for those highly-skilled individuals like the programmers. Thus, this job can present you wide range of tasks that you can explore and hone your skills.

These things cited above are just a few of the factors why I considered becoming a Virtual Assistant. To have the convenience of time and place in your hands is a privilege that an ordinary worker won’t be able to experience in a traditional work setting. As I go along my journey into this business, I am looking forward to discovering more things to love and enjoy.

To be successful in business, sometimes the wisest move to make is to ask for help. Remember that you don’t have to do it all alone. Get a co-worker from a distance!

The Dangers Of Overhead Power Lines Best Practices

Every year people at work are killed or seriously injured when they come into contact with live overhead electricity power lines.

If a machine, scaffold tube, ladder, or even a jet of water touches or gets too close to an overhead wire, then electricity will be conducted to earth. This can cause a fire or explosion and electric shock and burn injuries to anyone touching the machine or equipment. An overhead wire does not need to be touched to cause serious injury or death as electricity can jump, or arc, across small gaps.

One of the biggest problems is that people simply do not notice overhead lines when they are tired, rushing or cutting corners. They can be difficult to spot, eg in foggy or dull conditions, when they blend into the surroundings at the edge of woodland, or when they are running parallel to, or under, other lines. Always assume that a power line is live unless and until the owner of the line has confirmed that it is dead. This guidance is for people who may be planning to work near overhead lines

where there is a risk of contact with the wires, and describes the steps you should take to prevent contact with them. It is primarily aimed at employers and employees who are supervising or in control of work near live overhead lines, but it will also be useful for those who are carrying out the work.

Types of overhead power lines

Most overhead lines have wires supported on metal towers/pylons or wooden poles – they are often called ‘transmission lines’ or ‘distribution lines’. Most high-voltage overhead lines, ie greater than 1000 V (1000 V = 1 kV) have wires that are bare and insulate but some have wires with a light plastic covering or coating. All high-voltage lines should be treated as though they are uninsulated. While many low-voltage overhead lines (ie less than 1 kV) have bare insulate wires, some have wires covered with insulating material. However, this insulation can sometimes be in poor condition or, with some older lines, it may not act as effective insulation; in these cases you should treat the line in the same way as an insulate line. If in any doubt, you should take a precautionary approach and consult the owner of the line.

There is a legal minimum height for overhead lines which varies according to the voltage carried. Generally, the higher the voltage, the higher the wires will need to be above ground. Equipment such as transformers and fuses attached to wooden poles and other types of supports will often be below these heights. There are also recommended minimum clearances published by the Energy Networks Association.

What does the law require?

The law requires that work may be carried out in close proximity to live overhead lines only when there is no alternative and only when the risks are acceptable and can be properly controlled. You should use this guidance to prepare a risk assessment that is specific to the site. Businesses and employees who work near to an overhead line must manage the risks. Overhead line owners have a duty to minimize the risks from their lines and, when consulted, advise others on how to control the risks. The line owner will usually be an electricity company, known as a transmission or distribution network operator, but could also be another type of organization, eg Network Rail, or a local owner, eg the operator of a caravan park.

Preventing overhead line contact

Good management, planning and consultation with interested parties before and during any work close to overhead lines will reduce the risk of accidents. This applies whatever type of work is being planned or undertaken, even if the work is temporary or of short duration. You should manage the risks if you intend to work within a distance of 10 m, measured at ground level horizontally from below the nearest wire.

Remove the risk, the most effective way to prevent contact with overhead lines is by not carrying out work where there is a risk of contact with, or close approach to, the wires. Avoiding danger from overhead power lines. If you cannot avoid working near an overhead line and there is a risk of contact or close approach to the wires, you should consult its owner to find out if the line can be permanently diverted away from the work area or replaced with underground cables. This will often be inappropriate for infrequent, short-duration or transitory work. If this cannot be done and there remains a risk of contact or close approach to the wires, find out if the overhead line can be temporarily switched off while the work is being done. The owner of the line will need time to consider and act upon these types of requests and may levy a charge for any work done.

Risk control

If the overhead line cannot be diverted or switched off, and there is no alternative to carrying out the work near it, you will need to think about how the work can be done safely. If it cannot be done safely, it should not be done at all. Your site-specific risk assessment will inform the decision. Things to consider as part of your risk assessment include:

the voltage and height above ground of the wires. Their height should be measured by a suitably trained person using non-contact measuring devices;
the nature of the work and whether it will be carried out close to or underneath the overhead line, including whether access is needed underneath the wires;
the size and reach of any machinery or equipment to be used near the overhead line;
the safe clearance distance needed between the wires and the machinery or equipment and any structures being erected. If in any doubt, the overhead line’s owner will be able to advise you on safe clearance distances;the site conditions, undulating terrain may affect stability of plant etc;
the competence, supervision and training of people working at the site.

If the line can only be switched off for short periods, schedule the passage of tall plant and, as far as is possible, other work around the line for those times. Do not store or stack items so close to overhead lines that the safety clearances can be infringed by people standing on them.

Working near but not underneath overhead lines – the use of barriers. Where there will be no work or passage of machinery or equipment under the line, you can reduce the risk of accidental contact by erecting ground-level barriers to establish a safety zone to keep people and machinery away from the wires. This area should not be used to store materials or machinery. Suitable barriers can be constructed out of large steel drums filled with rubble, concrete blocks, wire fence earthed at both ends, or earth banks marked with posts.

If steel drums are used, highlight them by painting them with, for example, red and white horizontal stripes.
If a wire fence is used, put red and white flags on the fence wire.
Make sure the barriers can be seen at night, perhaps by using white or fluorescent paint or attaching reflective strips.

Avoiding danger from overhead power lines

The safety zone should extend 6 m horizontally from the nearest wire on either side of the overhead line. You may need to increase this width on the advice of the line owner or to allow for the possibility of a jib or other moving part encroaching into the safety zone. It may be possible to reduce the width of the safety zone but you will need to make sure that there is no possibility of encroachment into the safe clearance distances in your risk assessment.

Where plant such as a crane is operating in the area, additional high-level indication should be erected to warn the operators. A line of colored plastic flags or ‘bunting’ mounted 3-6 m above ground level over the barriers is suitable. Take care when erecting bunting and flags to avoid contact or approach near the wires. Passing underneath overhead lines, if equipment or machinery capable of breaching the safety clearance distance has to pass underneath the overhead line, you will need to create a passageway through the barriers, In this situation:

keep the number of passageways to a minimum;
define the route of the passageway using fences and erect goalposts at each end to act as gateways using a rigid, non-conducting material, eg timber or plastic pipe, for the goalposts, highlighted with, for example, red and white stripes;
if the passageway is too wide to be spanned by a rigid non-conducting goalpost, you may have to use tensioned steel wire, earthed at each end, or plastic ropes with bunting attached. These should be positioned further away from the overhead line to prevent them being stretched and the safety clearances being reduced by plant moving towards the line;
ensure the surface of the passageway is leveled, formed-up and well maintained to prevent undue tilting or bouncing of the equipment;
put warning notices at either side of the passageway, on or near the goalposts and on approaches to the crossing giving the crossbar clearance height and instructing drivers to lower jibs, booms, tipper bodies etc and to keep below this height while crossing;
you may need to illuminate the notices and crossbar at night, or in poor weather conditions, to make sure they are visible;
make sure that the barriers and goalposts are maintained.

Avoiding danger from overhead power lines

On a construction site, the use of goalpost-controlled crossing points will generally apply to all plant movements under the overhead line. Working underneath overhead lines. Where work has to be carried out close to or underneath overhead lines, eg road works, pipe laying, grass cutting, farming, and erection of structures, and there is no risk of accidental contact or safe clearance distances being breached, no further precautionary measures are required. However, your risk assessment must take into account any situations that could lead to danger from the overhead wires. For example, consider whether someone may need to stand on top of a machine or scaffold platform and lift a long item above their head, or if the combined height of a load on a low lorry breaches the safe clearance distance. If this type of situation could exist, you will need to take precautionary measures.

If you cannot avoid transitory or short-duration, ground-level work where there is a risk of contact from, for example, the upward movement of cranes or tipper trailers or people carrying tools and equipment, you should carefully assess the risks and precautionary measures. Find out if the overhead line can be switched off for the duration of the work. If this cannot be done:

refer to the Energy Networks Association (ENA) publication Look Out Look Up! A Guide to the Safe Use of Mechanical Plant in the Vicinity of Electricity Overhead Lines.2 This advises establishing exclusion zones around the line and any other equipment that may be fitted to the pole or pylon. The minimum extent of these zones varies according to the voltage of the line, as follows:
– low-voltage line – 1 m;
– 11 kV and 33 kV lines – 3 m;
– 132 kV line – 6 m;
– 275 kV and 400 kV lines – 7 m;
under no circumstances must any part of plant or equipment such as ladders, poles and hand tools be able to encroach within these zones. Allow for uncertainty in measuring the distances and for the possibility of unexpected movement of the equipment due, for example, to wind conditions;
carry long objects horizontally and close to the ground and position vehicles so that no part can reach into the exclusion zone, even when fully extended. Machinery such as cranes and excavators should be modified by adding physical restraints to prevent them reaching into the exclusion zone. Note that insulating guards and/or proximity warning devices fitted to the plant without other safety precautions are not adequate protection on their own;
make sure that workers, including any contractors, understand the risks and are provided with instructions about the risk prevention measures;
arrange for the work to be directly supervised by someone who is familiar with the risks and can make sure that the required safety precautions are observed;
if you are in any doubt about the use of exclusion zones or how to interpret the ENA document, you should consult the owner of the overhead line.

Where buildings or structures are to be erected close to or underneath an overhead line, the risk of contact is increased because of the higher likelihood of safety clearances being breached. This applies to the erection of permanent structures and temporary ones such as polytunnels, tents, marquees, flagpoles, rugby posts, telescopic aerials etc. In many respects these temporary structures pose a higher risk because the work frequently involves manipulating long conducting objects by hand.

Avoiding danger from overhead power lines. The overhead line owner will be able to advise on the separation between the line and structures, for example buildings using published standards such as ENA Technical Specification 43-8 Overhead Line Clearances.1 However, you will need to take precautions during the erection of the structure. Consider erecting a horizontal barrier of timber or other insulating material beneath the overhead line to form a roof over the construction area – in some cases an earthed, steel net could be used. This should be carried out only with the agreement of the overhead line owner, who may need to switch off the line temporarily for the barrier to be erected and dismantled safely.

Ideally, work should not take place close to or under an overhead line during darkness or poor visibility conditions. Dazzle from portable or vehicle lighting can obscure rather than show up power lines. Sometimes, work needs to be carried out near uninsulated low-voltage overhead wires, or near wires covered with a material that does not provide effective insulation, connected to a building. Examples of such work are window cleaning, external painting or short-term construction work. If it is not possible to re-route or have the supply turned off, the line’s owner, eg the distribution network operator, may be able to fit temporary insulating shrouds to the wires, for which a charge may be levied. People, plant and materials still need to be kept away from the lines.

Emergency procedures

If someone or something comes into contact with an overhead line, it is important that everyone involved knows what action to take to reduce the risk of anyone sustaining an electric shock or burn injuries. Key points are:

never touch the overhead line’s wires;
assume that the wires are live, even if they are not arcing or sparking, or if they
otherwise appear to be dead;
remember that, even if lines are dead, they may be switched back on either automatically after a few seconds or remotely after a few minutes or even hours if the line’s owner is not aware that their line has been damaged:
if you can, call the emergency services. Give them your location, tell them what has happened and that electricity wires are involved, and ask them to contact the line’s owner:
if you are in contact with, or close to, a damaged wire, move away as quickly as possible and stay away until the line’s owner advises that the situation has been made safe:
if you are in a vehicle that has touched a wire, either stay in the vehicle or, if you need to get out, jump out of it as far as you can. Do not touch the vehicle while standing on the ground. Do not return to the vehicle until it has been confirmed that it is safe to do so;

Avoiding danger from overhead power lines, be aware that if a live wire is touching the ground the area around it may be live. Keep a safe distance away from the wire or anything else it may be touching and keep others away.

Maximize the Potential of Your Business Presentation

Business presentations are a collateral reflection of who you are. A glimpse of your personality could be seen in the ways and the content of your presentation.

The way you carry yourself, the way you speak, deliver your sentences, tackle tricky questions with confidence and successfully convey your message, speak volumes about your personality.

Still, there are much more ways in which you can support your business presentation to reach its maximum potential.

HIGHLIGHT YOUR SUPERPOWER

A positive way to keep your audience attentive to you is to show them that you are worth their time and trust. Rather than speaking about your achievements and future goals, speak about your credibility because if even little points will exist with which the crowd will not feel connected to then the tables will instantly turn.

Talk about your goals within the first few minutes of the presentation

Choose your presentation design which corresponds with your goals, which should be introduced to your audience as early as possible. This will help your audience to correlate what you are expressing with the ‘why’ and ‘what’ you want to achieve.

Never underestimate the impact of a powerful image/quote

A business presentation is usually a collection of fertile ideas, knit together as one to illustrate a larger picture. So, the smart use of different images/quotes to introduce different ideas will supply more power to your presentation. Vocalizing the quotes or speaking few important words out loud will bring your presentation to life, especially if the presentation has numerous bar graphs, bullet points, and pie charts.

GIVE YOUR AUDIENCE THE POWER TO BRAINSTORM OVER YOUR QUESTIONS

One of the unbeatable ways to make your presentation more interactive is to begin it with a question which you, yourself will answer. Like you can start with “I asked myself what all can my team will be able to do and contribution for making this project a success?”. So, based on this question you can build up your presentation. Be alert to all the questions from your audience as they are icebergs of curiosity. The more you will suffice your audience, the stronger their trust will grow in you.

Be ready to tackle tough questions

Always be confident and logical at answering the questions from the audience. There will always be questions whose responses if given without solid facts and coherence, will put your image down in your crowd’s eyes. If you know your topic as well as you’re your audience, then always keep your business binary clean and do not ever shelve any question from the audience.

KEEP YOUR OWN QUESTIONS READY IF NOBODY ASKS YOU ANY

It could be a possibility that your audience is shy or somewhat hesitant to ask you questions about your presentations. Always remember, if you face this kind of a situation, then always compose a question to yourself because ‘zero curiosity’ turns into ‘zero interest’ overnight.

Take your crowd on a final journey

Always take your crowd on a final journey before you wrap up the presentation. Highlight all the important points and tell the crowd how they will be productive if given proper attention by the appropriate crowd.

Keeping the immense support in mind which we get from the PowerPoint presentations, one should also be able to support her/himself equally well during the closing moments of the presentation because humans invented the PowerPoint and not vice versa.

Writing For Professionals

Having a great resume is the first step to landing that ideal job. Resume writing can be the most stressful part of the job search. But it is also the most effective way to share your experience and qualifications. The purpose of your resume is to create enough interest that the employer will want to see you for a more in-depth face to face interview. Those resumes receiving the most attention are structured with the following components:

Value Proposition Statement

This section should state to the employer the immediate value you will bring to their organization. If you are a business development professional with successful experience working with companies in the medical industry you should have this listed in this section. An example of this statement would be “an experienced business development professional with established existing relationships in place with key regional medical equipment companies. These established relationships will allow me to gain immediate access to key decision makers early within the sales cycle”. The value proposition statement allows the employer to visualize you in this position and as an immediate contributor to their organization.

Keywords In Resume Writing

Effective resume writing should be done in a way that allows you to stand out from the crowd. One of the most effective ways to do this is to make sure you use the appropriate keyword (s) for the job posting. So we know that most companies are using parsing software in reviewing resumes. This software is designed to filter for keywords from the resumes they receive. This software will look through resumes for these keywords.

So simply put keywords are those words that easily describes the position you are applying for. In the example above the position is business development professional. So what words immediately come to mind with this position? Correct, business development. Therefore you will want the keywords to be the words business development. To tell your story you should use these keywords in a natural story telling manner.

Highlight Your Experience

Many professionals have a wealth of valuable relevant experience to share. The key is how much of this experience should you share on your resume? Resumes are parsed and if selected will be reviewed by the employer for about 20 seconds or less. In resume writing it is totally acceptable to construct a 2-3 page resume if you are applying for an executive level position. All other positions 1-2 pages are common. Remember most employers know that the average job seeker has three plus jobs in their career. The length of the resume is not as important as the use of keywords and highlighting your relevant experience and qualifications. The only experience you should highlight are those experiences that apply to the job. As mentioned above you should naturally tell your story using keyword and relevant job experience.

Having a great resume is easily accomplished and doesn’t require fancy words, design or layout. There are many free resume writing templates on the internet that can help you with layout etc. Because this document is so important in getting you closer to your new job we encourage you to devote the necessary time to get it right. Most importantly before you send your resume to a perspective employer you should have a trusted person review it and provide feedback. Be sure to use spellcheck and look for grammatical errors etc. Remember you only get one chance to make a great first impression.

Resume Writing Made Affordable

Many professionals choose to write their resumes and with tremendous results. But if you feel the need to use a professional service know that these companies and professionals fees range in price from $300-$1500 based on the required technical copy writing skills. In other words if you are applying for an IT or Medical position you would want a resume writer with that level of experience to write impact copy or content on your behalf.

You are now closer to securing that position that most fits your skills and qualifications. Wishing you the very best

We hope this article clarifies some of the confusion in the use of keywords and value proposition statements. Resumes are designed to gain the attention of the prospective employer. Take some time in listing your qualifications and skills. With this article you are now equipped to tell a great story about your qualifications and experiences.